Techflex® Insultherm® Tru-Fit Braided Fiberglass Sleeving
7 Colors - Fray Resistant Fiberglass Sleeving - Max Temp: 1,200°F
0.0 / 5
Insultherm Tru-Fit Sleeving Features
- Operating Temps: -94°F to 1,202ºF (-70°C to 650°C)
- For High Temp - Low Voltage Applications
- Extremely Abrasion & Cut Resistant
- Will Not Burn or Support Combustion
- RoHS Compliant & Halogen Free
- Resists Common Chemicals & Solvents
- UL Recognized: VW-1
- Excellent Low Temp Flexibility
- Cuts Easily With Scissors
- Melt Temp: 2,048°F / 1,120°C
- Inside Diameters Are Measured as Round Not Flat
Insultherm Tru-Fit provides a sturdy, long lasting, and inexpensive insulation solution. It is flexible and expandable, and can easily be installed over applications with irregular shapes and tight turns. Insultherm Tru-Fit is a braided fiberglass sleeving that has been heat-treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. Insultherm Tru-Fit sleeving is engineered for applications where temperatures as high as 1,200°F may be encountered. Tru-Fit is used as primary insulation on low voltage applications such as leads in toasters, coffee makers, ranges, and other appliances. Insultherm Tru-Fit sleeving may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible.
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
| Size | Diameter | Product Part # | Wall Thick. | Expansion Range | Standard Spool Put-Ups | Colors | ||
| Min. | Max. | Bulk | Shop | |||||
3/8" 7/16" 1/2" 5/8" 3/4" 1" | .375" .438" .500" .625" .750" 1.000" | FGL0.38 FGL0.44 FGL0.50 FGL0.63 FGL0.75 FGL1.00 | .016" .016" .016" .016" .016" .016" | .375" .438" .500" .625" .750" 1.000" | .399" .462" .524" .655" .786" 1.040" | 100' 100' 100' 100' 100' 100' | 50' 50' 50' 50' 50' 50' | 6 6 6 6 6 6 |
| Physical Properties | |
| Monofilament Thickness (ASTM D-204) | NA |
| Flammability Rating | VW-1 |
| Recommended Cutting | Scissor |
| Colors | 2 |
| Wall Thickness | .006 - .016 |
| Tensile Strength - Yarn (ASTM D-2265) lbs. | NA |
| Abrasion Resistance | Medium |
| Specific Gravity | 1.0 - 1.8 |
| Moisture Absorption % (ASTM D-570) | .01 |
| Hard Vacuum Data (ASTM E-595 at 10-5 torr) | |
| TML | .02 |
| CVCM | .01 |
| WVR | .0 |
| Smoke D-Max (ASTM E-662) | NA |
| Outgassing | Low |
| Chemical Resistance 1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected | |
| Aromatic Solvents | 1 |
| Alipahtic Solvents | 1 |
| Chlorinated Solvents | 1 |
| Weak Bases | 1 |
| Strong Bases | 1 |
| Salt Water (O-S-1926) | 1 |
| Hydraulic Fluid (MIL-H-5606) | 1 |
| Lubricating Oil (MIL-L-7808) | 1 |
| De-Icing Fluid (MIL-A-8243) | 1 |
| Strong Acids | 2 |
| Strong Oxidants | 2 |
| Esters/Ketones | 1 |
| UV Light | 2 |
| Petroleum | 1 |
| Fungus (ASTM G-21) | 1 |
| Salts | 1 |
| Operating Temperatures | |
| Minimum Continuous | -94°F/-70°C |
| Maximum Continuous (MIL-I-23053) | 1,202°F/650°C |
| Melt (ASTM D-2117) | 2,048°F/1,120°C |
| Other Information | |
| Halogen Free | Yes |
| RoHS | Yes |
| UL/CSA | Yes |
| SVHC | None |
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.
Looking for a quotation ? We would be happy to help by providing a quick response, inventory status, and Volume Level pricing, when available. Please fill out the form below and a representative will be in touch with you within hours to one business day to answer any questions and quote your request.
Product Details
Insultherm Tru-Fit provides a sturdy, long lasting, and inexpensive insulation solution. It is flexible and expandable, and can easily be installed over applications with irregular shapes and tight turns. Insultherm Tru-Fit is a braided fiberglass sleeving that has been heat-treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve usability and performance. Insultherm Tru-Fit sleeving is engineered for applications where temperatures as high as 1,200°F may be encountered. Tru-Fit is used as primary insulation on low voltage applications such as leads in toasters, coffee makers, ranges, and other appliances. Insultherm Tru-Fit sleeving may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible.
Product Specifications
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
| Size | Diameter | Product Part # | Wall Thick. | Expansion Range | Standard Spool Put-Ups | Colors | ||
| Min. | Max. | Bulk | Shop | |||||
3/8" 7/16" 1/2" 5/8" 3/4" 1" | .375" .438" .500" .625" .750" 1.000" | FGL0.38 FGL0.44 FGL0.50 FGL0.63 FGL0.75 FGL1.00 | .016" .016" .016" .016" .016" .016" | .375" .438" .500" .625" .750" 1.000" | .399" .462" .524" .655" .786" 1.040" | 100' 100' 100' 100' 100' 100' | 50' 50' 50' 50' 50' 50' | 6 6 6 6 6 6 |
| Physical Properties | |
| Monofilament Thickness (ASTM D-204) | NA |
| Flammability Rating | VW-1 |
| Recommended Cutting | Scissor |
| Colors | 2 |
| Wall Thickness | .006 - .016 |
| Tensile Strength - Yarn (ASTM D-2265) lbs. | NA |
| Abrasion Resistance | Medium |
| Specific Gravity | 1.0 - 1.8 |
| Moisture Absorption % (ASTM D-570) | .01 |
| Hard Vacuum Data (ASTM E-595 at 10-5 torr) | |
| TML | .02 |
| CVCM | .01 |
| WVR | .0 |
| Smoke D-Max (ASTM E-662) | NA |
| Outgassing | Low |
| Chemical Resistance 1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected | |
| Aromatic Solvents | 1 |
| Alipahtic Solvents | 1 |
| Chlorinated Solvents | 1 |
| Weak Bases | 1 |
| Strong Bases | 1 |
| Salt Water (O-S-1926) | 1 |
| Hydraulic Fluid (MIL-H-5606) | 1 |
| Lubricating Oil (MIL-L-7808) | 1 |
| De-Icing Fluid (MIL-A-8243) | 1 |
| Strong Acids | 2 |
| Strong Oxidants | 2 |
| Esters/Ketones | 1 |
| UV Light | 2 |
| Petroleum | 1 |
| Fungus (ASTM G-21) | 1 |
| Salts | 1 |
| Operating Temperatures | |
| Minimum Continuous | -94°F/-70°C |
| Maximum Continuous (MIL-I-23053) | 1,202°F/650°C |
| Melt (ASTM D-2117) | 2,048°F/1,120°C |
| Other Information | |
| Halogen Free | Yes |
| RoHS | Yes |
| UL/CSA | Yes |
| SVHC | None |
Product Manuals
Frequently Asked Questions
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.
Videos
Related Items
| PART # | |
|---|---|
|
|
