2/1 Fabric Heat Shrink Tubing
Features:
• Shrinks to 1/2 it's original diameter• High shrink temperature - 176 degrees fahrenheit
• Resists common automotive chemicals
• Halogen free
• Easy to install
• Cuts easily with sharp scissors
• Rohs compliant
This unique product is made of Polyolefin and Polyester yarns, making it the only shrinkable fabric of its kind.It has a shrink ratio of 2:1. This product is extremely flexible and resistant to trapping water, heat and humidity. It provides exceptional protection from abrasions, chafing and cutting even at high temperatures, It is ideal for protecting components such as plastic pipes, rubber hoses, harnesses and wiring bundles. Where noise and rattling is an issue, this product can be the solution to this problem.
Please Note: Our Diameters for Heat Shrink Tubing are measured as ROUND TUBE, NOT FLAT.
Click on Tabs to get more information.
All Prices Listed in Canadian Dollars
| Part # | Nominal Size | Unshrunk Diameter | Unshrunk Diameter | Shrunk Diameter | Shrunk Diameter | Weight per 100 ft |
|---|---|---|---|---|---|---|
| Inches | MM | Inches | MM | Inches | ||
| HSH2F0.50-25 | 1/2" | 12 | 0.472 | 6 | 0.236 | 1 lbs |
| HSH2F0.50-100 | 1/2" | 12 | 0.472 | 6 | 0.236 | 1 lbs |
| HSH2F0.50-500 | 1/2" | 12 | 0.472 | 6 | 0.236 | 1 lbs |
| HSH2F0.75-25 | 3/4" | 20 | 0.787 | 10 | 0.393 | 1.50 lbs |
| HSH2F0.75-100 | 3/4" | 20 | 0.787 | 10 | 0.393 | 1.50 lbs |
| HSH2F0.75-500 | 3/4" | 20 | 0.787 | 10 | 0.393 | 1.50 lbs |
| HSH2F1.36-25 | 1 3/16" | 30 | 1.18 | 15 | 0.59 | 2 lbs |
| HSH2F1.36-100 | 1 3/16" | 30 | 1.18 | 15 | 0.59 | 2 lbs |
| HSH2F1.36-500 | 1 3/16" | 30 | 1.18 | 15 | 0.59 | 2 lbs |
| HSH2F1.50-25 | 1 1/2" | 40 | 1.57 | 20 | 0.78 | 2.50 lbs |
| HSH2F1.50-100 | 1 1/2" | 40 | 1.57 | 20 | 0.78 | 2.50 lbs |
| HSH2F1.50-500 | 1 1/2" | 40 | 1.57 | 20 | 0.78 | 2.50 lbs |
- Material - Polyolefin and Polyester yarns
- Ratio - 2 to 1
- Flammability - Non-Flame-Retardant
- Shrink Temperature - 176° F (80° C)
- Maximum Continuous Temperature / MIL-DTL-23053 - 257° F (125° C)
- Minimum Continuous Temperature / MIL-DTL-23053 - -40° F (-40° C)
- Recommended Cutting - Scissors
- Wall Type - Single
- Pliancy - Very Flexible
- Abrasion Resistance - High
- Chemical Resistance - Lubricating oil, Antifreeze (50% Ethylene Glycol), Brake Fluid, Engine Oil, Unleaded Gasoline, Diesel Fluid, Hydraulic Fluid, Mineral Hydraulic Fluid, Battery Acid, Water
Facebook
Twitter
Google+
Pinterest
YouTube