Techflex® Insultherm® Ultra Flex® Pro Braided Cable Sleeving
Heavy Wall Braided Fiberglass Sleeving - Max Temp: 1,200°F
0.0 / 5
Ultraflex PRO Fiberglass Sleeving Features
- Operating Temps: -94°F to 1,202°F (-70°C to 650°C)
- Heavy Duty 1/32" Wall Thickness
- Cuts Easily With Scissors
- Will Not Burn or Support Combustion
- Extremely Abrasion and Cut Resistant
- Resists Common Chemicals & Solvents
- Increased Expandability for Easy Installation
- Melt Temp: 2,048°F/1,120°C
Inside Diameters Are Measured as Round Not Flat
The heavy wall construction, large available diameters and high expandability of Ultraflex PRO sleeving provides a high level of protection and ease of installation when used to insulate pipes and hoses subject to abrasion and vibration. Ultraflex Pro sleeving cuts easily with scissors, and special heat treated construction minimizes fraying and dusting during assembly. Increased wall thickness adds value to insulation.
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
| Nominal Size | Product Part # | Wall Thick. | Expansion Range | Standard Spool Put-Ups | Lbs/ 100' | ||
| Min. | Max. | Bulk | Shop | ||||
| 1/2" 3/4" 1" 1 1/4" 1 1/2" | FHH0.50NT FHH0.75NT FHH1.00NT FHH1.25NT FHH1.50NT | .025" .040" .032" .035" .035" | 3/8" 5/8" 7/8" 1" 1 1/8" | 5/8" 1 5/32" 1 3/8" 1 3/4" 2 1/8" | 100' 100' 50' 50' 50' | 50' 50' 25' 25' 25' | 3.5 8.0 7.0 10.5 10.0 |
| Physical Properties | |
| Monofilament Thickness (ASTM D-204) | NA |
| Flammability Rating | VW-1 |
| Recommended Cutting | Scissor |
| Colors | 1 |
| Wall Thickness | .025 - .035 |
| Tensile Strength - Yarn (ASTM D-2265) lbs. | NA |
| Abrasion Resistance | Medium |
| Specific Gravity | 1.0 - 1.8 |
| Moisture Absorption % (ASTM D-570) | .01 |
| Hard Vacuum Data (ASTM E-595 at 10-5 torr) | |
| TML | .01 |
| CVCM | .00 |
| WVR | .00 |
| Smoke D-Max (ASTM E-662) | NA |
| Outgassing | Low |
| Chemical Resistance 1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected | |
| Aromatic Solvents | 1 |
| Alipahtic Solvents | 1 |
| Chlorinated Solvents | 1 |
| Weak Bases | 1 |
| Strong Bases | 1 |
| Salt Water (O-S-1926) | 1 |
| Hydraulic Fluid (MIL-H-5606) | 1 |
| Lubricating Oil (MIL-L-7808) | 1 |
| De-Icing Fluid (MIL-A-8243) | 1 |
| Strong Acids | 2 |
| Strong Oxidants | 2 |
| Esters/Ketones | 1 |
| UV Light | 2 |
| Petroleum | 1 |
| Fungus (ASTM G-21) | 1 |
| Salts | 1 |
| Operating Temperatures | |
| Minimum Continuous | -94°F/-70°C |
| Maximum Continuous (MIL-I-23053) | 1,202°F/650°C |
| Melt (ASTM D-2117) | 2,048°F/1,120°C |
| Other Information | |
| Halogen Free | Yes |
| RoHS | Yes |
| UL/CSA | Yes |
| SVHC | None |
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.
Looking for a quotation ? We would be happy to help by providing a quick response, inventory status, and Volume Level pricing, when available. Please fill out the form below and a representative will be in touch with you within hours to one business day to answer any questions and quote your request.
Product Details
The heavy wall construction, large available diameters and high expandability of Ultraflex PRO sleeving provides a high level of protection and ease of installation when used to insulate pipes and hoses subject to abrasion and vibration. Ultraflex Pro sleeving cuts easily with scissors, and special heat treated construction minimizes fraying and dusting during assembly. Increased wall thickness adds value to insulation.
Product Specifications
Are we missing the specification you need? Please go to our Contact Us page and submit your question to us, or call 1-877-284-7760
| Nominal Size | Product Part # | Wall Thick. | Expansion Range | Standard Spool Put-Ups | Lbs/ 100' | ||
| Min. | Max. | Bulk | Shop | ||||
| 1/2" 3/4" 1" 1 1/4" 1 1/2" | FHH0.50NT FHH0.75NT FHH1.00NT FHH1.25NT FHH1.50NT | .025" .040" .032" .035" .035" | 3/8" 5/8" 7/8" 1" 1 1/8" | 5/8" 1 5/32" 1 3/8" 1 3/4" 2 1/8" | 100' 100' 50' 50' 50' | 50' 50' 25' 25' 25' | 3.5 8.0 7.0 10.5 10.0 |
| Physical Properties | |
| Monofilament Thickness (ASTM D-204) | NA |
| Flammability Rating | VW-1 |
| Recommended Cutting | Scissor |
| Colors | 1 |
| Wall Thickness | .025 - .035 |
| Tensile Strength - Yarn (ASTM D-2265) lbs. | NA |
| Abrasion Resistance | Medium |
| Specific Gravity | 1.0 - 1.8 |
| Moisture Absorption % (ASTM D-570) | .01 |
| Hard Vacuum Data (ASTM E-595 at 10-5 torr) | |
| TML | .01 |
| CVCM | .00 |
| WVR | .00 |
| Smoke D-Max (ASTM E-662) | NA |
| Outgassing | Low |
| Chemical Resistance 1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected | |
| Aromatic Solvents | 1 |
| Alipahtic Solvents | 1 |
| Chlorinated Solvents | 1 |
| Weak Bases | 1 |
| Strong Bases | 1 |
| Salt Water (O-S-1926) | 1 |
| Hydraulic Fluid (MIL-H-5606) | 1 |
| Lubricating Oil (MIL-L-7808) | 1 |
| De-Icing Fluid (MIL-A-8243) | 1 |
| Strong Acids | 2 |
| Strong Oxidants | 2 |
| Esters/Ketones | 1 |
| UV Light | 2 |
| Petroleum | 1 |
| Fungus (ASTM G-21) | 1 |
| Salts | 1 |
| Operating Temperatures | |
| Minimum Continuous | -94°F/-70°C |
| Maximum Continuous (MIL-I-23053) | 1,202°F/650°C |
| Melt (ASTM D-2117) | 2,048°F/1,120°C |
| Other Information | |
| Halogen Free | Yes |
| RoHS | Yes |
| UL/CSA | Yes |
| SVHC | None |
Product Manuals
Frequently Asked Questions
Have a question that is not answered here? Please go to our Contact Us page and submit your question to us.
Videos
Related Items
| PART # | |
|---|---|
|
|
