Non-Skid Slip Resistant Expandable Braided Sleeving
Features:• Color: Black
• Ideal for protecting and managing cable snakes
• Increases safety in high traffic areas
• Cut & Abrasion Resistant
• Expands up to 150%
• Halogen free
Non-Skid Slip Resistant Expandable Braided Sleeving is a unique combination of our standard PET material braided together with a matching thread of a high-friction polymer.
Non-Skid is engineered primarily for wire and cable management in smooth floor, high traffic environments such as broadcast studios where someone might inadvertently step on a cable snake and slip.
As long as there's no excessive pressure on cables protected with Non-Skid breaided sleeving, the entire snake glides easily and quietly along the floor. When local pressure is applied, such as someone stepping on the cable, the high friction material comes in contact with the floor and reduces the possibility of the cable sliding out from underfoot.
Non-Skid cable sleeving is substantially less "slippery" than our regular PET, yet provides the same level of flexibility and protection from cable wear and abrasion.
|NS0.75||3/4" Non-Skid Slip Resistant Expandable Braided Sleeving||
|NS1.50||1 1/2" Non-Skid Slip Resistant Expandable Braided Sleeving||
|NS2.00||2" Non-Skid Slip Resistant Expandable Braided Sleeving||
|NS0.75BS||3/4" Non-Skid Slip Resistant Expandable Braided Sleeving||
|NS1.50BS||1 1/2" Non-Skid Slip Resistant Expandable Braided Sleeving||
|NS2.00BS||2" Non-Skid Slip Resistant Expandable Braided Sleeving||
|Physical Properties||Operating Temperatures|
|Monofilament Thickness (ASTM D-204)||.028||Minimum Continuous||.-40°F/-40°C|
|Recommended Cutting||Hot Knife||Maximum Continuous (MIL-I-23053)||175°F/79°C|
|Colors||3||Melt (ASTM D-2117)||260°F/126°C|
|Moisture Absorption % (ASTM D-570)||.1 - .2|
|Chemical Resistance 1=No Effect 2=Little Effect 3=Affected 4=More Affected 5=Severely Affected|
|Aromatic Solvents||2||Alipahtic Solvents||1|
|Chlorinated Solvents||3||Weak Bases||1|
|Strong Bases||2||Salt Water (O-S-1926)||1|
|Hydraulic Fluid (MIL-H-5606)||1||Lubricating Oil (MIL-A-8243)||1|
|De-Icing Fluid (MIL-A-8243)||1||Strong Acids||3|
|Fungus (ASTM G-21)||1||Salts||1|